44 • Basic Functions
[ SNOM 360 USER MANUAL V1.00 ]
3
c. Free Key: ‚Line‘ is also the default setting for the
programmable keys. If no argument is set, the keys are
treated as free. Outgoing and incoming calls not bound to
any other key go to the fi rst such key that is not already
occupied.
Destination
The user can map a SIP URL to a particular programmable key by
setting this option and providing the URL as argument. This option can
be used in the following ways:
a. If the sip line 505@my.proxy.com is bound to key P3 with
this option, all calls coming to the phone from this number will
go to P3.
b. If P3 is pressed during the idle state, 505@my.proxy.
com will be dialed, as it is set as destination for this key.
c. In the ringing state, if the call comes from any line
other than 505@my.proxy.com, pressing P3 will transfer the
incoming call to 505@my.proxy.com.
Intercom
This option is similar to ‚Destination‘, with the exception that
pressing the key bound to ‚Intercom‘ enables the intercom mode, and the
phone will be directly connected to the set snom phone if authentication is
set up properly. This feature is useful in an offi ce environment as a quick
access key to connect to the operator or the secretary.
Park orbit
snom4s (snoms iPBX solution) provides its customers with the
opportunity to set up parking orbits on the media server, where calls can
be parked and picked up. The option ‚Park Orbit‘ enables the phone to
provide this feature.
To Next Page
Loading...
