Snom 360 - Page 79

snom technology AG • 79
[ SNOM 360 USER MANUAL V1.00 ]
accessed via the browser immediately after boot-up. If you do not want to
use DHCP, you must specify IP address, netmask, gateway, DNS domain,
and DNS server statically to ensure correct operation.
Illustration 1: Web confi guration
Start your web browser.
Enter the IP address of the phone as the URL (e.g. 192.168.0.100).
If you do not know the IP address, you can look it up on the phone’s
display by pressing the key.
There is a selection menu on the left side of the web page.
Click on the desired submenu; the current settings of this submenu
will be displayed in the larger blue fi eld on the right.
6