8-28 (N)
DSR-70/70P
. EE mode
. VIDEO IN ; 75 % Color bars
. VIDEO IN select/MENU ; COMPOSITE
Note : The “Setup ON/OFF” setting of the DSR-70 and
that a vectorscope must have been set to the same
position beforehand.
Connection 2
VIDEO OUT 1 (75 Z terminated)
(A) Burst (B) Composite Chroma Level
1PHASE control/Vector 1RV201/DDE-13 (
*
C-3)
1RV202/DDE-13 (
*
C-2)
TRIG : REF. VIDEO
Vector
Spec. (A) Set the dot of the burst in the right position on the scale.
(B) All dots should be inside the “
44
44
4” mark on the vector.
Conditions for adjustment Adjustment
..
..
. Specification
8-2-2-29. REC Composite Chroma Level Adjustment
. EE mode
. S VIDEO IN ; 75 % Color bars
. VIDEO IN select/MENU ; S VIDEO
Note : The “Setup ON/OFF” setting of the DSR-70 and
that a vectorscope must have been set to the same
position beforehand.
Connection 2
S VIDEO (C) OUT (75 Z terminated)
(A) Burst (B) S-C Level
1PHASE control/Vector 1RV102/DDE-13 (
*
F-1)
TRIG : REF. VIDEO
Vector
Spec. (A) Set the dot of the burst in the right position on the scale.
(B) All dots should be inside the “
44
44
4” mark on the vector.
Conditions for adjustment Adjustment
..
..
. Specification
8-2-2-30. REC S VIDEO Chroma Level Adjustment