www.spacelabshealthcare.com
12-3
XPREZZON AND QUBE
O
PERATIONS MANUAL
M ONITOR SETUP
To enable and adjust volume levels for High, Medium,
Low Priority Alarms, Remote Alarm, Alarm Watch, and
Key tones
1 Touch Monitor Setup.
2 Touch the Audio tab.
3 Touch the tone that you want to set the volume for: High Alarm,
Medium Alarm, Low Alarm, Remote Alarm, Alarm Watch, or
Key.
4 Under Audio, touch On.
Note:
This option may not be available. Contact your system administrator.
5 Use the slide control to adjust the volume. For higher volume, move the slide
to the right and for lower volume, move the slide to the left.
Figure 12-1 Audio Tab
To Next Page
Loading...
