Spacelabs qube User Manual

www.spacelabshealthcare.com
12-16
XPREZZON
AND QUBE
O
PERATIONS MANUAL
M ONITOR SETUP
To turn off the large numerics
1 Touch Monitor Setup.
2 Touch the Numerics tab.
3 Touch the last button on the right under Display Format.
To configure the large numerics format
1 Touch Monitor Setup.
2 Touch the Numerics tab.
3 Touch the Setup button on the Numerics tab.
The settings tab for the selected display format shows. Each tab
shows 3 or 4 parameters which correspond to the locations in
the large numerics window and a list of the parameters that can
be selected for display in those locations.
4 To change the parameter selections or locations, touch a location and then
touch a new parameter to display in that location.
Figure 12-10 Display format tabs

Spacelabs qube Specifications

General

Display Type	LCD
Connectivity	Ethernet
Mounting Options	Wall mount, roll stand
Power Source	AC
Compatibility	Spacelabs
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity Range	non-condensing