www.spacelabshealthcare.com
12-13
XPREZZON AND QUBE
O
PERATIONS MANUAL
M ONITOR SETUP
• Enable or disable minor graticules and adjust how they show. Minor graticules
are small, dashed line segments that show between full-scale graticule lines
when scaled pressures show.
To enable or disable the clock display
1 Touch Monitor Setup.
2 Choose one of the following according to whether you want to
change the clock setting on the local monitor or a remote
monitor:
• For the setting on the local monitor, touch the Setup tab.
• For the setting on the remote monitor, touch the Remote Config tab, and
then touch Remote Setup on the lower-right corner of the window. The
Remote Setup window shows.
3 Under Clock, touch On or Off.
To display the clock as a stopwatch or timer
1 Make sure the clock display is enabled, as described in To enable or disable
the clock display on page 12-13.
2 Touch the clock display in the lower-right corner of the screen.
3 Touch STOPWATCH or TIMER.
To return the clock to its digital display, touch the Clock in the lower right
corner of the monitor, then select Digital from the menu.
To select the number of parameter zones
1 Touch Monitor Setup.
2 Touch the Setup tab.
3 Under Zone Format touch 6 or 8.
To enable or disable the display alarm lights
1 Touch Monitor Setup.
2 Touch the Setup tab.
3 Under Alarm Light, touch On or Off.
To Next Page
Loading...
Need help?
General
