EasyManuals Logo

Spacelabs qube User Manual

Spacelabs qube
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
www.spacelabshealthcare.com
13-4
XPREZZON
AND QUBE
O
PERATIONS MANUAL
C LEANING, DISINFECTING,
AND STERILIZATION
Noninvasive Blood Pressure Cuffs
TruLink Reusable and Disposable Cuffs
The disposable cuff is packaged non-sterile and cannot be soaked, rinsed, or
sterilized.
The reusable cuff is packaged non-sterile. It may be cleaned and disinfected with an
enzymatic detergent and 10% solution of household bleach (5.25% sodium
hypochlorite).
Cuff Cleaning and Disinfection Materials
Enzymatic detergent such as ENZOL (US) or CEDEZYME (UK)
10% solution of household bleach (5.25% sodium hypochlorite) in distilled
water
Soft cloths or bristle brushes
Spray bottles
Cleaning Procedure
1 Prepare the enzymatic detergent and bleach solutions in separate bottles
according to the manufacturer’s instructions.
2 Spray detergent liberally on cuff, allowing it to sit for one minute.
3 Remove detergent with a soft cloth. For persistent contamination, scrub with
a soft bristled brush.
4 Rinse the cuff thoroughly with distilled water.
5 Spray bleach solution on the affected area until saturated. Allow the cuff to
sit for five minutes.
6 Remove any excess solution with a soft cloth and rinse again with distilled
water. Allow two hours for air drying at ambient temperature.
Note:
Make sure water does not enter the hose connector.
ABP Cuffs
Refer to the 90207/90217/90217A Ambulatory Blood Pressure Monitors Operations
Manual for cleaning instructions related to ABP cuffs and monitor.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Spacelabs qube and is the answer not in the manual?

Spacelabs qube Specifications

General IconGeneral
Display TypeLCD
ConnectivityEthernet
Mounting OptionsWall mount, roll stand
Power SourceAC
CompatibilitySpacelabs
Operating Temperature10°C to 40°C
Storage Temperature-20°C to 60°C
Humidity Rangenon-condensing

Related product manuals