Spacelabs qube User Manual

www.spacelabshealthcare.com
5-12
XPREZZON
AND QUBE
O
PERATIONS MANUAL
B ASIC OPERATIONS
To use Full Bed Review (FBR)
1 From the main taskbar, touch the Remote icon.
2 Select Remote View.
3 Touch On.
4 Under Select Subnet, touch the subnet that you want to view
remotely.
5 Under Select Bed, touch the bed that you want to view remotely.
6 Touch Full Bed Review button.
The Remote window automatically closes after you touch the Full Bed
Review button.
Refer to Full Bed Review on page 6-4 for more details.
Monitor Screen Saver
The monitor has a screen saver that can be enabled or disabled.
To activate the screensaver
1 From the main taskbar, touch Monitor Setup.
2 Touch Activate Screen Saver on the lower-right corner of the
window.
The screen saver shows.
To deactivate the screensaver
1 Touch the display, move the mouse, or press any key on the keyboard.
The standard display window shows.
Note:
The patient is still monitored when the screen saver activates. In Standby Mode,
the patient is not monitored. Refer to Standby Mode on page 5-13.
The screensaver is automatically deactivated by an incoming alarm condition.

Spacelabs qube Specifications

General

Display Type	LCD
Connectivity	Ethernet
Mounting Options	Wall mount, roll stand
Power Source	AC
Compatibility	Spacelabs
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity Range	non-condensing