Spectra Precision FOCUS 2 Series User Manual

SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
6 – Menu Key
114
CO (comment) records
A CO record is a comment added to the job from the system.
For example, when the Stn-Z is changed using the Z-Coord
function, or the horizontal angle is reset using the BSCheck
function, the system writes a comment record. This screen
shows an example of a comment in the Z-Coord function.
When a Stn-XYZ is input by Base-XYZ function, the recorded
station appears as a comment record.
This screen shows a record of temperature, pressure, and
prism constant that is saved when the station setup is
completed.
Deleting raw records
1. In the RAW screen (or in the data screen that appears
when you press
[REC/ENT]), press [^] or [v] to highlight the record to be deleted.
2. Press the DEL softkey.
A confirmation screen appears.
3. To delete the selected record, press [REC/ENT] or the OK softkey. (Otherwise, press the CE
softkey.)
The system returns to the RAW data screen.
Editing raw records
1. In the RAW screen (or in the data screen that appears when you press [REC/ENT]), press [^] or [v] to
highlight the record that you want to edit.
2. Press the Edit softkey.
3. Enter the new data manually or select data using the List or Stac softkey and then press
[REC/ENT].
4. To rewrite the data, press [REC/ENT] or the OK softkey. (Otherwise, press the CE softkey.)
The system executes the selected operation and returns to the RAW screen.

Spectra Precision FOCUS 2 Series Specifications

General

Brand	Spectra Precision
Model	FOCUS 2 Series
Category	Measuring Instruments
Language	English