Spectra Precision FOCUS 2 Series User Manual

SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
6 – Menu Key
115
Searching raw records
1. In the RAW screen, press the Srch softkey.
2. Enter the search criteria by doing one of the following:
– To find a point by name, enter the name in the PT field and press [REC/ENT] twice.
– Use the asterisk (*) as a wildcard. For example, when 30* is entered in the PT field, the
search matches the points named 300, 301, 302, 3000A2, and 3010.
– To search by point type, press [v] to move to the Type field and press [<] or [>] to change the
selected point type. The options are ALL, ST, SS, SO, CP, CO, and MLM.
Note – If a type in the Type field is selected, a value in the CD field does not have to be entered. Press
[REC/ENT]
in the PT field to start the search.
3. If more than one point matches the search criteria, the matching points are displayed in a list.
Press
[^] or [v] to highlight the point to be used. Then press [REC/ENT] to select it.
4. Detailed data for the selected record appears. Press the DSP softkey to change the fields shown.
Press
[ESC] to return to the list.
Note – If no point matches the specified criteria, an error screen appears. Press any key to return to
the data screen.

Spectra Precision FOCUS 2 Series Specifications

General

Brand	Spectra Precision
Model	FOCUS 2 Series
Category	Measuring Instruments
Language	English