Instruction Manual
for
AS380 Series Elevator Integrated Drive Controller
91
The forth line is the elevator control program version
Login interface
Password login
0
In this interface, input the password and login and user can check the
elevator running status. Note: if the password input is incorrect, only
main monitor interface, monitor status interface and re-login
interface can be seen ,
Elevator status display
Auto single-elev
Door lock closed
1 flr 0.00m/s
=== 00000018 ===
Press F1 to return to this window if not in error record window after
login. It includes the following contents in this window:
Auto, inspection, attendant, fire, etc.
Single or group status
Floor position of elevator
Running direction of elevator
Running speed of elevator
Running status of elevator
Note: the operation instructed below take this window as the first
window if there is no special notice.
Function selection
This window contains the following functions: monitor, parameters
classification, adjustment, reset, value-added fucntion, password
change, re-login, etc, and there is sub-window in some functions. The
detailed description of each menu see chapter one.
Detailed function Press Enter key to enter the detailed functions when in function
selection status, and they can be viewed and modified, please refer to
the next content for details
5.2.4.2 Operations from power on to elevator status window
Please refer to the following steps to view the elevator status after the correct connection between
handheld operator and main board:
To Next Page
Loading...
Need help?
General
