Storz DUOLITH SD1 - 8.1 Technical data

8-2
17 368 02 0320
Technical data, conformity and labelling
8.1 Technical data
DUOLITH SD1
Operating mode R-SW
single shock, continuous shock
HP 21700.0001: 1-21 Hz / 1-5 bar in steps of
0.1 bar
HP 21700.1001: 1-21 Hz / 0.3-5 bar
eff
Operating mode V-ACTOR:
- standard
- when using an
external display
31 Hz / 2,4 bar
1 - 50 Hz / 1.0 - 5.0- bar
Operating mode VACU-ACTOR:
– - Intensiy
with foot switch: // via display:
3 - all values adjustabler
according Table 4-4
Operating mode F-SW
single shock,
continuous shock 1-8 Hz/
in steps of 0,01 - 0,55 mJ/mm
2
Pressure VACU-ACTOR max 200 mbar
Under pressure VACU-ACTOR min. - 500 mbar
Mains input voltage (trolley)
120 VAC / 230 VAC
Mains frequency 50 / 60 Hz
Mains fuse
(T 6.3 AH / 250 VAC
at 120 VAC mains input voltage respectively
T 4 AH / 250 VAC
at 230 VAC mains input voltage)
Power consumption max. 700 VA
Ambient temperature
during operation
10 – 30 °C
Ambient temperature
during storage and transport
0 – 60 °C frost-free
Ambient air pressure
during operation
800 - 1,060 hPa
Ambient air pressure
during storage and transport
500 - 1,060 hPa
Air humidity
during operation
5 – 55%, non-condensing
Air humidity
during storage and transport
5 – 95%, non-condensing
Total weight without handpieces
max. 118 kg
Dimensions in treatment position
(W x H x D)
590 x 1,261 x 660 mm
Dimensions in transport position
(W x H x D)
590 x 970 x 660 mm
Classication according to MDD Class IIb device
Protection against the ingress of
water
IPX1