Storz DUOLITH SD1 - Using the Foot Switch; Using the Display; Function Overview of the Handpiece R-SW

4-51
17 364 02 0320
Operation
4.8.1 Using the foot switch
When using the foot switch to activate the VACU-ACTOR the treatment is carried out
with intensity 3.
The treatment will always be carried out with mode VI in which alternately an under-
pressure and overpressure will be produced.
• Apply massage oil onto the area to be treated.
• Place the VACU-ACTOR air tight to the skin.
• Keep the vent hole closed with your nger.
• Pressing the foot switch --> treatment will be started.
• Pressing the foot switch a second time --> treatment will be stopped.
NOTE
Move the suction cup slowly over the area to be treated as long as the treat-
ment lasts.
4.8.2 Using the Display
When using the Display the preadjusted parameters can be varied. See for this Chapter
4.4.
• Adjust the intensity, the frequency and the time limit on the touch screen.
• Choose the mode.
• Apply massage oil onto the area to be treated.
• Place the VACU-ACTOR air tight to the skin.
• Keep the vent hole closed with your nger.
• Press ON underneath the parameter list. --> treatment swill be started.
• Press OFF underneath the parameter list. --> treatment will be stopped.
NOTE
Move the suction cup slowly over the area to be treated as long as the treat-
ment lasts.
4.8.3 Function overview of the handpiece R-SW
For the total overview of the functions and the description of the handpiece, please
read the seperate Operating Manual fOr yOur handpieCe.