Storz DUOLITH SD1 - Copying Indications; Deleting an Indication; Editing Indications

4-19
17 364 02 0320
Operation
NOTE
An empty indication without any entryof a treatment step will not be saved.
Your indication is now created in the system. If you press the
button to return to
the overview, you will see your new indication in the list.
4.5.7 Copying indications
A copy of a preprogrammed indication can also be created.
The copy will then be provided with an additional number when it is saved and will
contain all of the videos and images of the original indication.
• Load the desired indication (see Chapter 4.5.5 lOading indiCatiOns).
• Press the COPY INDICATION button.
h The indication is now copied and can be edited (see Chapter 4.5.9 editing indiCa-
tiOns).
4.5.8 Deleting an indication
• Press .
– The list of indications is displayed.
• Select the indication that you want to delete by pressing the button in front of
it.
– The indication is opened.
• Press DELETE INDICATION.
• Conrm your input by pressing OK.
NOTE
This only applies to your own indications. Standard indications preprogrammed
by the manufacturer cannot be deleted.
4.5.9 Editing indications
Once you have created an indication, you can edit it.
NOTE
This only applies to your own indications. Standard indications prepro-
grammed by the manufacturer cannot be edited.
• To do this, set the indication to editing mode by pressing the
button.
The buttons with the pencil icon
indicate the areas that can be edited.