Black plate (201,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
! AUTO button
FULL AUTO mode operation:
When the “AUTO” button is pressed, the
indicator light “FULL AUTO” on the display
illuminates. In this state, fan speed, airflow
distribution, air-inlet control, and air con-
ditioner compressor operation are auto-
matically controlled.
AUTO mode operation:
If you operate any of the buttons on the
control panel other than the “OFF” button,
rear window defogger button and tem-
perature control buttons during FULL
AUTO mode operation, the indicator light
“FULL” on the control panel will turn off
and the indicator light “AUTO” will remain
illuminated. You can then manually control
the system as desired using the button
you operated. To change the system back
to the FULL AUTO mode, press the
“AUTO” button.
! OFF button
The automatic climate control system
turns off (the air conditioner compressor
and fan turn off) when the “OFF” button is
pressed.
When the “OFF” button is pressed, the
outside air circulati on mode (a ir inlet
selection OFF) is automatically selected.
! Temperature control button
Left-hand side
Right-hand side
To increase the temperature setting, press
the “
” side of the temperature control
button. To decrease the temperature
Climate control 4-7
– CONTINUED –
4
To Next Page
Loading...
