Black plate (64,1)
一般Model "A2470GE-B" EDITED: 2010/ 9/ 24
1-36 Seat, seatbelt and SRS airbags
If the ALR is equipped for the seatbelt,
refer to “Models with ALR” F1-36.
NOTE
. For details about the ELR, refer to
“Emergency Locking Retractor (ELR)”
F1-16.
. For details about the ALR, refer to
“A utomatic/Emer gency Loc king Re -
tractor (A/ELR)” F1-16.
! Models without ALR
1. Place the child restraint system in the
rear seating position.
2. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
manufacturer.
3. Insert the tongue plate into the buckle
until you hear a click.
4. Take up the slack in the lap belt.
5. Before having a child sit in the child
restraint system, try to move it back and
forth and right and left to check that it is
firmly secured. Sometimes a child restraint
can be more firmly secured by pushing it
down into the seat cushion and then
tightening the seatbelt.
! Models with ALR
1. Place the child restraint system in the
rear seating position.
2. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
manufacturer.
3. Insert the tongue plate into the buckle
until you hear a click.
To Next Page
Loading...
