Sun Microsystems StorEdge 3510 User Manual

Index-6 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
serial port connection, F-1, G-2, J-2, K-2
serial port parameters, F-2, G-3, H-2, I-2, I-4, J-2, J-5
SES version conflict, 7-4
Setting Loop IDs on Expansion Units, 4-26, B-6
settings records to keep, D-1
SFP connectors, 4-28
inserting in ports, 4-18, B-10
silencing alarms, 8-4
site planning, 2-1
console requirement, 2-7
customer obligations, 2-2
electrical/power, 2-4
EMC, 2-3
environmental, 2-3
layout, 2-5
physical, 2-5
safety precautions, 2-2
site preparation survey, 2-7
size of drive, 8-8
software
accessing the array, 5-5
software tools, 1-13
Solaris
reset baud rate, F-3
spare (local for logical drive), 6-25
spare drives, 9-7
specifications
clearances, 2-5
electrical/power, 2-4
physical (array), 2-5
specifications (product), A-3
speed of drive, 8-8
STAND-BY drive status, 8-9
status windows
checking, 8-6
switch
ID, 4-26, B-6
T
temp LED, 7-3
temperature
environmental range, 2-3
temperature LED, 7-3
tip command, F-3
topologies
Fibre Channel, 1-9
troubleshooting
disks not visible, 9-2
LUNs not visible, 9-2
U
Upgrading Firmware, 8-22
USED DRV drive status, 8-9
V
VERITAS DMP, enabling, 6-54
Veritas software, 6-55
VT100 terminal connection, 4-19
W
worksheet
preinstallation, 2-7
worldwide name
determining on Solaris OE, F-4
write-back cache, 5-5
write-through cache, 5-5

Sun Microsystems StorEdge 3510 Specifications

General

Brand	Sun Microsystems
Model	StorEdge 3510
Category	Storage
Language	English