xiv Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
FIGURE 4-19 Sun StorEdge 3511 FC Array Attached to Two Hosts and Two Expansion Units 4–24
FIGURE 4-20 Front Bezel and Front Bezel Locks of an Array 4–26
FIGURE 4-21 ID Switch Located on the Left Front Side of Arrays and Expansion Units 4–27
FIGURE 5-1 A Point-to-Point Configuration with a Dual-Controller Sun StorEdge 3510 FC Array and Two
Switches 5–13
FIGURE 5-2 A Point-to-Point Configuration With a Dual-Controller Sun StorEdge 3511 FC Array and Two
Switches 5–14
FIGURE 5-3 A DAS Configuration With Four Servers, a Dual-Controller Sun StorEdge 3510 FC Array, and
Two Expansion Units 5–17
FIGURE 5-4 A DAS Configuration With Four Servers, a Dual-Controller Sun StorEdge 3511 FC Array, and
Two Expansion Units 5–18
FIGURE 6-1 Initial Firmware Window 6–3
FIGURE 6-2 Firmware Main Menu 6–3
FIGURE 6-3 Example of an Allocation of Local and Global Spare Drives in Logical Configurations 6–22
FIGURE 6-4 Partitions in Logical Drives 6–31
FIGURE 6-5 Mapping Partitions to Host ID/LUNs 6–36
FIGURE 6-6 Example of LUN Filtering 6–43
FIGURE 7-1 Front Panel LEDs 7–2
FIGURE 7-2 Chassis Ear LEDs and Reset Button on Front Panel 7–3
FIGURE 7-3 Sun StorEdge 3510 FC Array I/O Controller Module and Battery Module LEDs 7–5
FIGURE 7-4 Sun StorEdge 3511 FC Array I/O Controller Module and Battery Module LEDs 7–5
FIGURE 7-5 I/O Expansion Module for a Sun StorEdge 3510 FC Expansion Unit 7–6
FIGURE 7-6 I/O Expansion Module for a Sun StorEdge 3511 FC Expansion Unit 7–6
FIGURE 7-7 AC Power Supply and Fan Module 7–8
FIGURE 7-8 DC Power Supply and Fan Module 7–8
FIGURE 8-1 Cooling Fan Locations 8–18
FIGURE 9-1 Automatic Rebuild 9–5
FIGURE 9-2 Manual Rebuild 9–7
FIGURE 9-3 Flashing the Drive LED of a Selected Drive 9–10
FIGURE 9-4 Flashing All Drive LEDs to Detect a Defective Non-Flashing Drive 9–10
FIGURE 9-5 Flashing All Drive LEDs Except a Selected Drive LED 9–11
FIGURE 9-1 Power Supply or Fan Module Flowchart, 1 of 2 9–15
To Next Page
Loading...
Need help?
General
