Chapter 8 Maintaining Your Array 8-13
8.4.4 Controller Voltage Temperature Status
8.4.4.1 View Controller Voltage and Temperature Status
Perform the following steps to check the controller voltage and temperature.
1. Choose “view and edit Peripheral devices → Controller Peripheral Device
Configuration → View Peripheral Device Status.”
Components with voltage and temperatures monitoring are displayed and identified
as normal or out-of-order.
2. Press Escape to exit the Status window.
8.4.4.2 Configure a Trigger Threshold
Perform the following steps to change a voltage or temperature trigger threshold.
1. Choose “view and edit Peripheral devices → Controller Peripheral Device
Configuration → Voltage and Temperature Parameters.”
To Next Page
Loading...
Need help?
General
