B-4 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
Refer to the “Monitoring JBODs” appendix in the Sun StorEdge 3000 family CLI User’s
Guide for more information about using these commands.
B.5 Using Sun StorEdge 3000 Family
Software Monitoring and Management
Tools with JBOD Arrays
The following software management tools are provided on the Sun StorEdge 3000
Family Professional Storage Manager CD, provided with your array. The
documentation CD provides the related user guides.
■ Sun StorEdge Configuration Service. Provides centralized storage configuration,
maintenance, and monitoring functions. Refer to the Sun StorEdge 3000 Family
Configuration Service User’s Guide for in-band setup procedures.
■ Sun StorEdge Diagnostic Reporter. Provides event monitoring and notification.
Refer to the Sun StorEdge 3000 Family Diagnostic Reporter User’s Guide for more
information.
■ Sun StorEdge Command-Line Interface (CLI). A command-line interface utility
that provides script-based management. Refer to the Sun StorEdge 3000 Family CLI
User’s Guide for CLI information.
For details on how to install Sun StorEdge Configuration Service, Sun StorEdge
Diagnostic Reporter, or Sun StorEdge CLI software, refer to the Sun StorEdge 3000
Family Software Installation Guide.
B.5.1 Sun StorEdge Configuration Service
Sun StorEdge Configuration Service supports the Sun StorEdge 3310 SCSI array, the
Sun StorEdge 3510 FC array and the Sun StorEdge 3511 FC array. It also supports, to
a limited degree, standalone Sun StorEdge 3510 FC JBOD arrays. Since standalone
JBOD arrays do not have a RAID controller to manage the disks, this software
support for JBODs is limited to the following functions:
■ viewing component and alarm characteristics
■ upgrading firmware on hard drives
■ upgrading firmware on SAF-TE devices
Refer to the “Monitoring JBODs” appendix in the Sun StorEdge 3000 Family
Configuration Service User’s Guide for information about using these functions with
JBOD arrays.