Sun Microsystems StorEdge3000 Series User Manual

1-8 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
1.2.5 Power and Fan Modules
Note – The Sun StorEdge 3511 FC array can only be ordered in an AC configuration.
However, DC power supplies can be ordered in an x-option kit, and the Sun
StorEdge 3511 FC array’s can be reconfigured using the DC power supplies. Refer to
the Sun StorEdge 3000 Family FRU Installation Guide.
Each array contains redundant (two) power and fan modules. Each module contains
a 420-watt power supply and two radial 52 cubic feet per minute (CFM) fans. Power
module autoranging capabilities range:
■ AC Power Supply. From 90 Volts Alternating Current (VAC) to 264 VAC.
■ DC Power Supply. From -36 Volts Direct Current (VDC) to -72 VDC.
A single power and fan module can sustain an array.
1.3 Interoperability
The array is designed for heterogeneous operation and supports the following
operating environments:
■ Solaris operating environment versions 8 and 9
■ Sun™ Linux 5.0 on the Sun LX50 server
■ Red Hat Linux distribution
■ Windows NT 4.0 and Windows 2000 server
■ IBM AIX Terminal Menu
■ HP-UX
Note – For information about supported versions of these operating environments,
refer to the release notes for your array.
The array does not require any host-based software for configuration, management,
and monitoring, which can be handled through the built-in firmware application.
The console window can be accessed via the DB9 communications (COM) port using
the
tip command, or via the Ethernet port using the telnet command.

Sun Microsystems StorEdge3000 Series Specifications

General

Brand	Sun Microsystems
Model	StorEdge3000 Series
Category	Storage
Language	English