Sun Microsystems StorEdge3000 Series User Manual

Appendix G Configuring a Windows 200x Server or Windows 200x Advanced Server G-3
5. In the Connect To window, select the COM port from the “Connect using:” drop-
down menu for that array.
6. Click OK.
7. In the Properties window, set the serial port parameters using the drop-down
menus.
Set serial port parameters to:
■ 38,400 baud
■ 8 data bits
■ 1 stop bit
■ No parity

Sun Microsystems StorEdge3000 Series Specifications

General

Brand	Sun Microsystems
Model	StorEdge3000 Series
Category	Storage
Language	English