SWDM40 OPERATION & MAINTENANCE MANUAL
Figure 3.2.1-17
Instructions about this interface: This interface is used for equipment maintenance information,
the followed icon become red when "Service Cycle" approaches since "The maintenance of last
time", which means that the specified item should be maintained. After finishing the
maintenance, press key 1/2 to move the cursor to the correct item, press the key 3 "Confirm",
then the record will keep this maintenance: when the time counting from the last maintenance
become zero, while the times are one more than the original one.
Enter the "Record Interface" (Figure 3.2.1-16) by clicking "Return" (key 8).
To Next Page