SUNWARD SWDM40 - Page 71

SWDM40 OPERATION & MAINTENANCE MANUAL
70
21
Auto idle switch
After pressing down the auto idle switch, the
system doesn’t work with the handle is in the
medium position, four seconds later, the engine
will adjust the rotation speed to 1000rmp. The
function is disabled after shutting down the
auto idle switch.
22
Failure diagnosis
switch
Read the flashing status of the engine failure
indicating light by pressing down the failure
diagnosis switch when there’s a flickering light
of the engine failure on the panel, it’s easy to
find out the reason and repair by referring to
the operation manual.
23
Engine medium
speed switch
Press down engine medium speed switch
，
engine keeps in setting speed running
（
setting
speed is 1600rpm
）
.
24
Failure diagnosis
page-up switch
Press down “up” failure diagnosis page-up
switch to find out and display the previous one
fault code of the engine.
25
Pressurized winch
suspension switch
Pressurized winch suspension will be opened.
★Note: This feature is not currently configured
on this model.
26
Failure diagnosis
page-down switch
Press down “down” failure diagnosis
page-down switch to find out and display the
next one fault code of the engine.
27
Fistula mode switch
Fistula mode is on.
★Note: This feature is not currently configured
on this model.