1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-48
QoS
The QoS link of the System page opens the QoS Basic Settings page. This page allows
you to configure QoS through following pages:
• Basic Settings
• Classmap
• Policymap
Basic Settings
Clicking the BASIC SETTINGS tab brings up the QOS BASIC SETTINGS page (Figure 5-35),
which allows you to configure QOS basic settings parameters. The parameters for this
page are shown in Table 5-28.
Figure 5-35. QOS Basic Settings Page
Table 5-28. QOS Basic Settings Page Parameters
Parameter Description
System Control With this parameter SYSTEM CONTROL can Start or Shutdown QoS.
Status This parameter allows enabling/disabling of the QoS status.
To Next Page
Loading...
