1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-18
Clicking the LOCAL USERS tab brings up the MANAGEMENT USER ACCOUNT
C
ONFIGURATION page (Figure 5-8). This page allows you to create or delete local user
accounts. You need more than privilege Level_5 to view all pages and need more than
privilege Level_10 for changing the configurations. The highest, Level_15, is for
Administrator privilege.
Any one of the configured users can be specified as ADMIN user.
The current active users are displayed with session, user name and peer address
details.
Radius
Clicking the RADIUS tab brings up the RADIUS SERVER CONFIGURATION page (Figure 5-9).
This page allows you to configure the RADIUS server parameters as shown in
Table 5-4.
Figure 5-9. Radius Server Configuration Page
Table 5-4. RADIUS Server Configuration Page Parameters
Parameter Description
Server ID
This parameter specifies the unique identifier of the RADIUS Server Entry using
a 2-characters input limit. The allowed value range is from 1 to 10. The factory
default is blank.
IP Address
This parameter specifies the IP Address of the RADIUS Server. The factory
default is blank.
To Next Page
Loading...
