1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-114
IP Route
Clicking the IP ROUTE tab brings up the IP ROUTE CONFIGURATION page (Figure 5-93),
which allows you to configure the static IP routes. The parameters for this page are
shown in Table 5-75.
Figure 5-93. IP Route Configuration Page
Table 5-75. IP Route Configuration Page Parameters
Parameter Description
Destination Network This parameter specifies the network address for which the route is being added.
Subnet Mask This parameter indicates the subnet mask for the Destination Network address.
Gateway This parameter denotes the Next Hop Gateway to reach the IP address.
Interface This parameter specifies the outgoing interface.
Distance (Metric) This parameter specifies the metric value of the destination.
To Next Page
Loading...
