5-39
Chapter 5: Web Based Management Utility
User
Clicking the USER tab brings up the SNMP SECURITY SETTINGS page (Figure 5-27),
which configures users configured in the SNMP for the User-based Security Model. The
parameters for this page are shown in Table 5-21.
Security Level
Security Level specifies the level of security used when generating SNMP
messages.
Storage Type Storage Type can be configured as Volatile or Non-Volatile.
Engine ID This parameter displays the SNMP Engine ID.
Figure 5-27. SNMP Security Settings Page
Table 5-21. SNMP Security Settings Page Parameters
Parameter Description
User Name User Name is the (User-based Security) model dependent security ID.
Authentication
Protocol
The Authentication Protocol is used for authentication.
Authentication Key
The Authentication Key is the secret authentication key used for messages sent
on behalf of this user to/from the SNMP.
Privacy Protocol
Privacy Protocol is an indication of whether or not messages sent on behalf of
this user to/from the SNMP are protected from disclosure, and if so, the type of
privacy protocol that is used.
Table 5-20. SNMP Target Parameter Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
