1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-86
MSTP
The MSTP link leads you to the following configuration pages:
• Basic Settings
• Timers
• Port Configuration
• VLAN Mapping
• Port Settings
• CIST Port Status
Table 5-53. RSTP Port Status Page Parameters
Parameter Description
Port This parameter specifies the port identifier.
Designated Root
This parameter specifies the unique Bridge Identifier of the bridge that is
recorded as the root for the segment to which the port is attached.
Designated Cost
This parameter specifies the path cost of the Designated Port of the segment
connected to this port.
Designated Bridge
This parameter specifies the Bridge Identifier of the bridge, which this port
considers to be the Designated Bridge for this port's segment.
Designated Port
This parameter specifies the Port Identifier of the port on the Designated Bridge
for this port's segment.
Type
This parameter specifies the operational point-to-point status of the LAN
segment attached to this port. It indicates whether a port is considered to have a
Point-to-point connection or Shared Media.
Role
This parameter specifies the port's current role as defined by the Spanning Tree
Protocol.
Port State
This parameter specifies the port's current state as defined by application of the
Spanning Tree Protocol.
To Next Page
Loading...
