Supermicro SSE-X3348S - Target Address

5-37
Chapter 5: Web Based Management Utility
Target Address
Clicking the TARGET ADDRESS tab brings up the SNMP TARGET ADDRESS SETTINGS page
(Figure 5-25), which configures SNMP target address parameters. The parameters for
this page are shown in Table 5-19.
View Type This parameter specifies whether a View Type is Included or Excluded.
Storage Type
Use this parameter to specify whether the Storage Type is volatile or
non-volatile.
Figure 5-25. SNMP Target Address Settings Page
Table 5-19. SNMP Target Address Settings Page Parameters
Parameter Description
Target Name This parameter specifies a Target Name as a unique identifier.
Target IP Address
The Target IP Address specifies a target address to be used in the generation of
SNMP operations.
Target Timeout
Target Timeout specifies the maximum round trip for communicating with the
Target IP Address.
Target Retries
Target Retries specifies the number of attempts to be made when no response is
received
Transport Tag
The Transport Tag value is used to select a target address for a particular
operation.
Table 5-18. SNMP View Tree Settings Page Parameters (Continued)
Parameter Description