1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-34
Group
Clicking the GROUP tab brings up the SNMP GROUP SETTINGS page (Figure 5-22). This
page helps you map a combination of the S
ECURITY MODEL and the SECURITY NAME into
a G
ROUP NAME, which is used to define an access control policy. In addition, this page
displays the S
TORAGE TYPE of the Group Table. The parameters for this page are shown
in Table 5-16.
Figure 5-22. SNMP Group Settings Page
Table 5-16. SNMP Group Settings Page Parameters
Parameter Description
Security Model
This parameter allows you to select from version 1, version 2 or version 3 for the
S
ECURITY MODEL used.
Security Name Use this parameter to specify the SECURITY NAME string.
Group Name Use this parameter to specify the G
ROUP NAME string.
Storage Type
Use this parameter to specify whether the STORAGE TYPE is volatile or
non-volatile.
To Next Page
Loading...
