5-41
Chapter 5: Web Based Management Utility
SNMP AgentX
Clicking the AGENTX link brings up the SNMP AGENTX SUBAGENT SETTINGS page
(Figure 5-29), which allows you to configure SNMP Agentx sub-agent parameters. The
parameters for this page are shown in Table 5-23.
Figure 5-29. SNMP AgentX Subagent Settings Page
Table 5-23. SNMP AgentX Subagent Settings Page Parameters
Parameter Description
Transport Domain This parameter allows you to specify the TCP.
IP Address Type This parameter specifies IPv4 or IPv6 for the IP ADDRESS TYPE.
Master IP Address This parameter specifies the Master Agent IP address.
Master Port No
This parameter specifies the Master Port number. Allowed values range from 0
to 65535. The default value is 705.
To Next Page
Loading...
