Supermicro SSE-X3348S - Timers; Local as

5-101
Chapter 5: Web Based Management Utility
802.1x
The 802.1x link provides link to the following configuration pages:
• Basic Settings
• Port Settings
• Timers
• Local AS
Basic Settings
Clicking the BASIC SETTINGS tab brings up the 802.1X BASIC SETTINGS page
(Figure 5-81), which displays the various 802.1x Basic Settings parameters. The
parameters for this page are shown in Table 5-64.
Figure 5-81. 802.1x Basic Settings Page
Table 5-64. 802.1x Basic Settings Page Parameters
Parameter Description
System Control This parameter starts or shuts down 802.1x in the switch.
802.1x Authentication
This parameter allows enabling or disabling of the 802.1x based port security
feature in the switch.
Authentication Server This parameter specifies the Authentication Server Location as Remote or Local.
Network Access
Server ID
This parameter specifies the Authenticator ID, which originates the
Access-Request Packets.
Protocol Version This parameter displays the version number.