5-103
Chapter 5: Web Based Management Utility
Timers
Clicking the TIMERS tab brings up the 802.1X TIMER CONFIGURATION page (Figure 5-83),
which configures Timer parameters at the individual port level. The parameters for this
page are shown in Table 5-12.
Operational Control
Direction
This parameter specifies the current security status.
Auth SM State
This parameter specifies authentication state machine state according to 802.1x
standard protocol.
Supp SM State
This parameter specifies the supplicant state machine state as either Connected
or Disconnected.
Restart
Authentication
Selecting True will restart the authentication. Otherwise choose False.
Maximum
Authentication
Request
This parameter specifies the maximum number of authentication requests that
can be sent from the authenticator before getting a response from the
supplicant.The allowed ranges are 1 to 10. The default value is 2.
Re-authentication
This parameter provides configuration to enable or disable the re-authentication
mechanism on the port.
Figure 5-83. 802.1x Timer Configuration Page
Table 5-65. 802.1x Port Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
