1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-124
MAC Binding
Clicking the MAC BINDINGS link brings up the DHCP MAC BINDING page (Figure 5-103),
which allows you to configure parameters for DHCP MAC binding. The parameters for
this page are shown in Table 5-85.
End IP
This parameter specifies the last IP address in the address pool that is used for
dynamic allocation by the DHCP server.
Lease Time This parameter specifies the time interval for which the IP address is valid.
Utilization Threshold
This parameter specifies the DHCP Pool Utilization Threshold value. The
allowed value ranges between 0 and 100.
Domain name This parameter specifies the domain name for address pool.
DNS Server This parameter specifies the IP address of DNS server for this pool.
Netbios Name Server This parameter specifies the IP address of netbios name server for this pool.
Netbios Node
You can either choose the Netbios node to be specified as Number, B Node, H
Node, M Node or P Node.
Default Router Specifies the default router address for this pool.
Figure 5-103. DHCP MAC Bindings Page
Table 5-84. DHCP Pool Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
