5-123
Chapter 5: Web Based Management Utility
Pool Settings
Clicking the POOL SETTINS link brings up the DHCP POOL SETTINGS page (Figure 5-102),
which allows you to configure the IP address pool that can be used by the DHCP server
to allocate IP addresses. The parameters for this page are shown in Table 5-84.
Boot File Specifies the file name for booting.
Option Specifies the DHCP option in the range 1 to 2147483647.
Value
User can specify the Option field value as ASCII or HEX STRING or IP
ADDRESS.
Option List table This parameter displays the saved option and value in a switch.
Figure 5-102. DHCP Pool Settings Page
Table 5-84. DHCP Pool Settings Page Parameters
Parameter Description
Pool ID
This parameter specifies the pool ID to index among the different subnet pools
configured. The allowed value ranges between 1 and 2147483647.
Network This parameter specifies the subnet of the IP address in the pool.
Subnet Mask This parameter specifies the subnet mask of the IP address in the pool.
Start IP
This parameter specifies the first IP address in the address pool that is used for
dynamic allocation by the DHCP server.
Table 5-83. DHCP Server Settings Page Parameters (Continued)
Parameter Description
To Next Page
Loading...
