5-23
Chapter 5: Web Based Management Utility
SSL
Clicking the SSL (Secure Socket Layers) tab brings up the SSL CONFIGURATION page
(Figure 5-14), which allows you to configure SSL parameters and generate SSL
certificates for HTTPS. To configure SSL and enable HTTPS, follow the procedure
below using this page.
Configuring SSL and Enabling HTTPS
1. Configure C
IPHER SUITE and CRYPTO KEY RSA with your chosen parameters.
2. Create a certificate request by entering the subject name and clicking on the
CREATE button.
3. When the page reloads, the text box below the CREATE button will display a
certificate request. Copy and paste these contents to a text file that says a.csr.
Cipher
The default for this parameter is 3DES-CBC. You can instead choose to
configure it as 3DES-CBC or DES-CBC or both
Authentication
This parameter’s default is HMAC-SHA1. You can instead choose to configure it
as HMAC-SHA1 or HMAC-MD5 or both.
Figure 5-14. SSL Configuraiton Page
Table 5-8. SSH Configuration Page Parameters
Parameter Description
To Next Page
Loading...
