5-167
Chapter 5: Web Based Management Utility
RIP6
Clicking the RP6 tab brings up the RRD RIPV6 CONFIGURATION page (Figure 5-141).
The parameters for this page are shown in Table 5-121.
Figure 5-141. RRD RIPv6 Configuration Page
Table 5-121. RRD RIPv6 Configuration Page Parameters
Parameter Description
Status This parameter enables or disables redistribution for RIP6.
Default Metric
This parameter specifies the metric for the routes that are being re-distributed.
The allowed value ranges from 0 and 16. The default value is 0.
Export
With this parameter you can choose to export Direct Routes, Static Routes or
OSPFv3 Routes.
To Next Page
Loading...
