5-17
Chapter 5: Web Based Management Utility
Administrative users can also create Enable Passwords in this page. Low privilege
users can use these Enable Passwords in the W
EB SETTINGS page to enable access to
privilege configurations.
Administrative users can set an Enable Password for all privilege levels. By default, the
Enable Password is set only for the highest level (Level_15). This default password is
the same as the default password set for the ADMIN user login.
User Accounts
Table 5-3. Management Security Basic Settings Page Parameters
Parameter Description
Authentication mode
The authentication modes supported are L
OCAL, RADIUS and TACACS. The
default option is L
OCAL mode where the user name and password is
authenticated using a local user data base. In RADIUS mode, the authentication
request is sent to the configured RADIUS servers. In TACACS mode, the
authentication request is sent to the configured TACACS server.
Authentication traps
This parameter allows you to ENABLE or DISABLE SNMP Traps for SNMP access
authentication events.
Authorization Status
When the login authentication mode is TACACS, a user can enable or disable
authorization status.
Figure 5-8. Management User Account Configuration Page
To Next Page
Loading...
