5-251
Chapter 5: Web Based Management Utility
Mroute Info
Clicking the MROUTE INFO tab brings up the PIM ROUTE INFORMATION page
(Figure 5-214), which displays PIM route information. The parameters for this page are
shown in Table 5-188.
Figure 5-214. PIM Route Information Page
Table 5-188. PIM Route Information Page Parameters
Parameter Description
Component This parameter specifies the PIM Component Identifier.
Source This parameter specifies the source address.
Group This parameter specifies the group address.
Up Time This parameter specifies the up time in seconds.
Expiry Time This parameter specifies the expiry time in seconds.
RP Address This parameter specifies the RP Address.
Incoming Interface This parameter specifies the Incoming Interface Name.
RPF Neighbor Addr This parameter specifies the RPF Neighbor Address.
Route Flags This parameter specifies the SPT Bit or Wild Card Bit or RPT Bit.
Name This parameter specifies the Outgoing Interface Name
State This parameter specifies the Outgoing Interface State.
Mode This parameter specifies the Outgoing Interface Mode.
To Next Page
Loading...
