1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-30
WEB Settings
Clicking the WEB SETTINGS link brings up the WEB GUI SETTINGS page (Figure 5-19),
which displays all basic Web GUI settings. The parameters for this page are shown in
Table 5-13.
Figure 5-19. Web GUI Settings Page
Table 5-13. Web GUI Settings Page Parameters
Parameter Description
Session timeout
This timeout value is used to automatically logout inactive user sessions. The
default value is 5-minutes (600-seconds).
Statistics Refresh
Timer
The statistics pages (grouped under "Statistics" node in left side tree) can be set
to auto refresh based on this Statistics Refresh Timer. The default value zero
means no auto refresh by default.
Session Privilege
This displays the current privilege level of the logged in user. You can choose to
enter another privilege level using this configuration if you have the Enable
password for the required privilege levels. The Enable Passwords for different
levels are configurable in the Enable Password parameter on the Management
Security web page.
To Next Page
Loading...
