5-149
Chapter 5: Web Based Management Utility
Ext Aggregation
Clicking the EXT AGGREGATION tab brings up the OSPF AS EXTERNAL AGGREGATION
C
ONFIGURATION page (Figure 5-125), which allows you to configure OSPF external
aggregation parameters. The parameters for this page are shown in Table 5-106.
Figure 5-125. OSPF AS External Aggregation Configuration Page
Table 5-106. OSPF AS External Aggregation Configuration Page Parameters
Parameter Description
Summary Prefix This parameter specifies the summary prefix for external aggregation.
Prefix Length
This parameter specifies the length of the prefix. The allowed value ranges
between 1 to 128.
Area ID This parameter specifies the Area identifier.
To Next Page
Loading...
