5-15
Chapter 5: Web Based Management Utility
File Copy
You can copy a local file to or from a remote TFTP server. This feature is useful to create
a backup of configuration files remotely, and also to download configuration files from
remote computers to the switch. You need to provide a local file name and also the
remote TFTP server’s IP address and file name for this feature.
File Management
This section displays information about the configuration files stored in the switch and
allows you to do any of the following actions:
• You can select one or more files and delete them.
• You can choose a Startup Configuration file from this file list.
• You can choose the File option and enter a name for a Startup Configuration file.
Alternatively you can choose the “File” option and enter the name for the “Startup
Config” file.
• You can also choose the N
O RESTORE option for not loading any configuration files
on the next reboot of the switch.
Firmware Upgrade
Clicking the FIRMWARE UPGRADE link brings up the FIRMWARE UPGRADE page
(Figure 5-6). This page allows you to upgrade the firmware in N
ORMAL or FALLBACK
M
EMORY. In stacking, the firmware is upgraded in all stack members automatically.
Figure 5-6. Firmware Upgrade Page
To Next Page
Loading...
