EasyManua.ls Logo

Supermicro SSE-X3348S - Page 157

Supermicro SSE-X3348S
318 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-105
Chapter 5: Web Based Management Utility
Local AS
Clicking the LOCAL AS tab brings up the LOCAL AUTHENTICATION SERVER CONFIGURATION
page (Figure 5-16), which configures Local Authentication Server information. The
parameters for this page are shown in Table 5-12.
Figure 5-84. Local Authentication Server Configuration Page
Table 5-67. Local Authentication Server Configuration Page Parameters
Parameter Description
User Name
This parameter specifies the identity of the user who is seeking authentication,
and is set by a string of not more than 20 printable characters.
Password
This parameter specifies the password specific to the user name, and is set by a
string of not more than 20 printable characters.
Permission
This parameter represents the allowance and denial of access. The values that
can be configured are:
Allow - When set to Allow, the authentication request is allowed over the set
of ports in the P
ORT LIST.
Deny - When set to Deny, the authentication request is NOT allowed over
the set of ports in the P
ORT LIST.
Port List
This parameter represents the complete set of ports of the authenticator to which
the user is allowed or denied access. It is based on permission.
Auth-TimeOut
This parameter specifies the timeout for authentication. The allowed ranges from
1 to 7200.

Table of Contents

Other manuals for Supermicro SSE-X3348S

Related product manuals