4-20 FI SYSTEM DIAGNOSIS
TPS ADJUSTMENT
1. Adjust the engine rpm to 1 150 r/min. (2-14)
2. Connect the special tool (Mode select switch) to the dealer
mode coupler at the wiring harness.
3. If the throttle position sensor adjustment is necessary, loosen
the screw and turn the throttle position sensor 1 and bring
the line to the middle.
4. Then, tighten the screw to fix the throttle position sensor.
09930-11950: Torx wrench
09930-82720: Mode select switch
The LCD displays the line for 0.4 sec. at a time, and when such
a display repeats two times, it indicates the current position
where the sensor is fixed.
A Incorrect
B Correct position
SAMPLE
To Next Page
Loading...
