2-16 PERIODIC MAINTENANCE
CLUTCH
• Lift and support the fuel tank with its prop stay. (5-3)
• Turn in the adjuster 1 all the way into the clutch lever assem-
bly.
• Loosen the lock-nut 2 and turn the clutch cable adjuster 3
to obtain proper cable play.
• Remove the clutch release adjuster cap.
• Loosen the lock-nut 4 and turn out the adjusting screw 5
two or three rotations.
• From that position, slowly turn in the adjusting screw 5 until
resistance is felt.
• From this position, turn out the adjusting screw 5 1/2 rotation,
and tighten the lock-nut 4 while holding the screw 5.
• Turn the cable adjuster 3 to obtain 10 – 15 mm (0.4 – 0.6 in)
of free play A at the clutch lever end.
• Tighten the lock-nut 2.
Clutch lever play A: 10 – 15 mm (0.4 – 0.6 in)
Clutch release screw: 1/2 turn out
Clutch release adjuster cap: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
Inspect every 6 000 km (4 000 miles, 12 months).
SAMPLE
To Next Page
Loading...
