8-78 CHASSIS
• Completely clean the thread of caliper housing and bolts.
• Apply THREAD LOCK to the caliper housing bolts.
99000-32130: THREAD LOCK SUPER “1360”
CALIPER INSTALLATION
Install the caliper in the reverse order of removal. Pay attention
to the following points:
• Tighten each bolt to the specified torque.
Brake hose union bolt 1: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Brake caliper housing bolt 2:
37 N·m (3.7 kgf-m, 27.0 lb-ft)
Brake caliper mounting bolt 3:
25 N·m (2.5 kgf-m, 18.0 lb-ft)
• Adjust the chain slack. (2-21)
Bleed air from the system after reassembling the cali-
per. (2-26)
SAMPLE
To Next Page
Loading...
