Suzuki GSX-R1000K5 - Reassembly

8-58 CHASSIS
REASSEMBLY
Reassemble the swingarm in the reverse order of disassembly and removal.
Pay attention to the following points:
100 N·m
10.0 kgf-m
72.5 lb-ft
( (
15 N·m
1.5 kgf-m
11.0 lb-ft
( (
90 N·m
9.0 kgf-m
65.0 lb-ft
( (
65 N·m
6.5 kgf-m
47.0 lb-ft
( (
65 N·m
6.5 kgf-m
47.0 lb-ft
( (
Apply SUZUKI SUPER GREASE “A” to the bearings,
washers and dust seals.
NOTE:
When installing the bearing, stamped mark on the
bearing must face outside.
Left Right
115 N·m
11.5 kgf-m
83.0 lb-ft
( (
50 N·m
5.0 kgf-m
36.0 lb-ft
( (
78 N·m
7.8 kgf-m
56.5 lb-ft
( (
Washer
78 N·m
7.8 kgf-m
56.5 lb-ft
( (
1 mm (0.04 in)
1 mm (0.04 in)
1 mm (0.04 in) 1 mm (0.04 in)
SAMPLE