Suzuki GSX-R1000K5 - Inspection; Pair Hoses; Pair Reed Valve; Pcv Hose

11-6 EMISSION CONTROL INFORMATION
PAIR (AIR SUPPLY) SYSTEM AND EMISSION CONTROL SYSTEM
INSPECTION
PAIR HOSES
• Inspect the PAIR hoses for wear or damage.
• Inspect the PAIR hoses for secure connection.
PAIR REED VALVE
• Lift and support the fuel tank. (5-3)
• Remove the PAIR reed valve cover. (3-27)
• Inspect the reed valve for the carbon deposit.
• If the carbon deposit is found in the reed valve, replace the
PAIR reed valve with a new one.
PCV HOSE
• Remove the PCV hose from the crankcase breather cover.
• Inspect the PCV hose for wear and damage.
• If it is worn or damaged, replace the PCV hose with a new
one.
PAIR CONTROL SOLENOID VALVE
REMOVAL
• Remove the air cleaner box. (5-13)
• Disconnect the PAIR control solenoid valve lead wire coupler
1 and PAIR hoses.
• Remove the PAIR control solenoid valve 2.
INSPECTION
• Check that air flows through the air inlet port to the air outlet
port.
• If air does not flow out, replace the PAIR control solenoid
valve with a new one.
A Air flow
SAMPLE