CHASSIS 8-21
INSPECTION
INNER AND OUTER TUBES
• Inspect the inner tube outer surface and outer tube inner sur-
face for scratches.
• Inspect the “ANTI-FRICTION” metal surfaces for scratches.
• If any defects are found, replace them with the new ones.
FORK SPRING
• Measure the fork spring free length.
• If it is shorter than the service limit, replace it with a new one.
Front fork spring free length:
Service Limit: 225 mm (8.86 in)
DAMPER ROD
• Move the inner rod by hand to examine it for smoothness.
• If any defects are found, replace inner rod/damper rod (car-
tridge) with a new one.
Do not remove the “ANTI-FRICTION” metals, A and
B.
Upper side
Lower side
SAMPLE
To Next Page
Loading...
